How a South Yorkshire steel manufacturer cut costs by 50 per cent

Typically, conveyor systems are used to handle this type of waste.

South Yorkshire-based company Shafton Steel Services has significantly reduced both costs and maintenance time after replacing a traditional conveyor system with a tailored lifting solution.

placeholder image
Sax Lift.

At its facility in South Yorkshire, the steel manufacturer Shafton Steel Services, part of Billington Holdings’ group of companies, operates a robotic coping and drilling line that generates large quantities of steel scrap, which falls into a pit beneath the machine.

Typically, conveyor systems are used to handle this type of waste. However, due to space constraints at the installation site, the company opted for an alternative solution based on a scissor lift table. A conventional conveyor system would have required too large a footprint to accommodate the machine in its intended location.

Ryan O’Connor, Profile Manager at Shafton Steel Services, said: “Compared to a conveyor system, the footprint is significantly smaller, while maintenance requirements and safety risks are reduced.

“The lift table allows us to raise the entire unit by crane, ensuring full access to all components and safer cleaning of the pit. It is 20-25 per cent easier to do maintenance work on the lift compared to a conveyor, which has a clear impact on our bottom line.”

The company commissioned the design and implementation of the scissor lift table, which runs on a rail system inside the pit. Steel scrap is collected in a bin placed on the lift platform and transported to one end of the system, where it is raised to floor level and removed. The total investment came to just under £29,000 – approximately half the cost of a comparable conveyor system.

Rising demand for flexible solutions

The lift table was developed and supplied by Sax Lift. The project reflects a broader trend for the company, which is seeing increasing demand for bespoke products in the UK market.

“In many cases, customers come to us with a specific challenge, and we work together to find a solution,” said Jeff Aackersberg Olsen, Sales Manager responsible for the UK market at Sax Lift. “We typically start from a standard product and adapt it to meet the customer’s needs. This approach is often both faster and more cost-effective than developing a fully bespoke solution from scratch.”

According to Sax Lift, around 25 per cent of the company’s orders consist of customised solutions such as the rail system delivered to Shafton Steel Services.

News you can trust since 1887
Follow us
© 2026 Iconic Media Group Ltd. All rights reserved.Cookie SettingsTerms and ConditionsPrivacy notice